Aries-automotive 75-0000 Manual de usuario descargar pdf

PARTS LIST:

Qty Description Qty Description

1 Mount Bracket 1 8mm x 20mm Hex Bolt

1 License plate X holder 1 8mm Lock Washer

6 6mm x 25mm Hex Bolt 1 8mm Hex Nut

12 6mm Flat Washer 2 8mm Flat Washer

6 6mm lock washers

PROCEDURE:

1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ

INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION.

2. Begin installation by removing License plate & factory holder (if equipped)

3. Once removed begin installation by locating & removing the 2 factory bolts just under the

front bumper lip on passenger right side vehicle (Fig 1) shows location of factory bolts.

4. With these two bolts removed select the Mount Bracket above and secure to the bumper lip

with the (2) 6mm x 25mm Hex bolts & (2) 6mm flat washers & (2) 6mm lock washers as

seen in (Fig 2). Snug but do not tighten hardware at this time.

5. Attach and secure the License plate X holder to the mount bracket you have just installed

with the (1) 8mm x 20mm Hex bolt, (2) 8mm flat washers, (1) 8mm lock washer & (1) 8mm

Hex nut Note: there are 3 holes for various position for you to choose, when you have

selected to which hole you will use tighten all hardware.

Page 1 of 2 12/2/2011

INSTALLATION INSTRUCTIONS

2011/2012 Fiat License Plate Relocator

Part # 75-0000

Mounting Brackets

License plate X holder

1 2

PARTS LIST: Qty Description Qty Description 1 Mount Bracket 1 8mm x 20mm Hex Bolt 1 License plate X holder 1 8mm Lock Washer

6. Next, select your License plate and secure it to the Holder with the (4) 6mm x 25mm Hex bolt, (4) 6mm flat washers & (4) 6mm lock washers, f

Sin comentarios

Aries-automotive 75-0000 Manual de usuario