Aries-automotive B35-3006 Manual de usuario

Busca en linea o descarga Manual de usuario para Para El Coche Aries-automotive B35-3006. Aries Automotive B35-3006 User Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 2
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
2008-10 SUPER DUTY F250/F350
PART# B35-3006 / 35-3006
Page 1 of 2
PARTS LIST:
1 Bull Bar
1 Driver/Left side Mounting Bracket
1 Passenger/Right Mounting Bracket
4 3/8” x 1 ¼” Hex Head Bolts
4 3/8” Nylock Nuts
8 3/8” Flat Washers
PROCEDURE:
1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ
INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION.
2. NOTE: It may be necessary to remove/relocate front license plate and license plate bracket. It
is not required, but strongly recommended. If local/state law requires a license plate, license
plate relocation kit is available.
3. From front of vehicle remove the driver side bumper mount bolts (Figure 2).
WARNING! Do not remove passenger and driver bumper mount bolts at the same time.
Remove one side at a time.
4. Place Mounting Bracket onto vehicle and line it up against the outer gusset bend on the frame.
Leave about 1/8” clearance between bottom of Mounting Bracket and bumper. Secure
Mounting Bracket to vehicle using the factory bolts (Figure 3). Fully tighten these bolts at this
time.
5. Once the driver side Mounting Bracket is fully tightened, repeat steps 2 - 4 for passenger side
Mounting Bracket.
6. With help position Bull Bar on the outer side of Mounting Brackets. Attach Bull Bar to Mounting
Brackets using the included (4) 3/8” x 1 ¼” Hex Head Bolts, (4) 3/8” Nylock Nuts, and (8) 3/8”
Flat Washers (Figure 4). Do not tighten at this time.
7. Level and adjust Bull Bar as desired, then tighten all hardware at this time.
8. Do periodic inspections to the installation to make sure that all hardware is secure and tight..
INSTALLATION INSTRUCTIONS
BULL BAR
Driver Side
Mounting Bracket
Passenger Side
Mounting Bracket
Figure 1
Vista de pagina 0
1 2

Indice de contenidos

Pagina 1 - INSTALLATION INSTRUCTIONS

2008-10 SUPER DUTY F250/F350 PART# B35-3006 / 35-3006 Page 1 of 2 PARTS LIST: 1 Bull B

Pagina 2 - Figure 5

Page 2 of 2 Installation Complete Factory Bolts Driv

Comentarios a estos manuales

Sin comentarios