Aries-automotive S222008-2 Manual de usuario descargar pdf

4. Repeat process for passenger side of vehicle to complete installation.

3. Attach Side Tube to Front, and Rear Brackets using (4) 10mm hex bolts, (4) 10mm flat washers &. (4) 10mm lock

Washers, snug but do not tighten at this time.

(8) 10MM X 30MM HEX HEAD BOLTS (8) 10MM LOCK WASHERS

(8) 10MM FLAT WASHERS (8) 8MM LOCK WASHERS

S222008 / S222008-2

2005-13 TOYOTA TACOMA EXTENDED CAB SHORT BED 2/4WD

INSTALLATION INSTRUCTIONS

SIDE BAR PART #

PARTS LIST

(2) SIDE TUBES WITH STEPS

(2) FRONT MOUNT BRACKETS (8) 8MM x 30MM 1.25 PITCH HEX HEAD BOLTS

(2) REAR MOUNT BRACKETS (8) 8MM FLAT WASHERS

PROCEDURE

1. Begin installation by working on driver side of the vehicle.

2. Remove plastic plugs on rocker panel to locate mounting holes for brackets. Attach and secure Front and

Rear Mount Bracket to existing holes using 8MM bolts, 8MM flat washers, and 8MM lock washers. For each

outer hole and hand tighten.

Adjust Side Tube so that it is level and centered, and tighten all bolts to complete the driver-side assembly.

Passenger side

NOTE: IT IS ADVISABLE TO RE-CHECK ALL FASTENERS FOR TIGHTNESS AFTER ONE WEEK.

Pagina 1

4. Repeat process for passenger side of vehicle to complete installation. 3. Attach Side Tube to Front, and Rear Brackets using (4) 10mm hex bolts,

Modelos relacionados S222008

Sin comentarios