Aries-automotive 1042 Manual de usuario descargar pdf

ARIES OFFROAD

1042 GRAND CHEROKEE

1995-1998 4WD

INSTALLATION INSTRUCTIONS

PARTS LIST

1 – Aries Front Bar

1 – Mounting Bracket – Driver Side

1 – Mounting Bracket – Passenger Side

6 – 3/8’’ x 1

1/4’’ Hex Bolts

12 – 3/8’’ USS Flat Washers

6 – 3/8’’ Nylon Lock Nuts

INSTALLING THE MOUNTING BRACKETS

Remove factory tow hooks from front section of vehicle (located within front bumper area).

Using the bolts that held the tow hooks in place (there should be two of these bolts per hook). Attach

the mounting brackets as per diagram below , do not fasten these bolts too tightly as you may have to

move the brackets around slightly to align the grill guard to your vehicles front bumper – see next step

installing the grill guard.

INSTALLING THE FRONT BAR

Line up the three holes on the lower portion of the front bar with the three holes in the mounting

brackets (outer edge). Use the 3/8’’ hex bolts and the 3/8’’ lock nuts to fasten guard to the mounting

brackets. Once the guard is attached to the brackets align guard to the bumper. Ounce you are

satisfied that the grill guard is aligned.

Begin to tighten all fasteners.

DIAGRAM. DRIVERS SIDE SHOWN

ARIES OFFROAD 1042 GRAND CHEROKEE 1995-1998 4WD INSTALLATION INSTRUCTIONS PARTS LIST 1 – Aries Front Bar 1 – Mounting Bracket – Driver Side 1 – Moun

Sin comentarios

Aries-automotive 1042 Manual de usuario