Aries-automotive 15600WRB Manual de usuario descargar pdf

PARTS LIST:

Qty’s Description Qty’s Description

1 Winch receiver plate bracket 8 12mm Speed nuts

PROCEDURE:

1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ

INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION.

2. Please NOTE: This part is an addition to part # AL15600 & will be installed on your JK after

(Steps 3 to 8 have been completed on new installs. If your JK already has the AL15600

installed please remove it and then follow (Step 10 for 2007-11 model years.) or Step 13 for

model years 2012-14 NOTE: Cutting of the factory air pump bracket will need to be performed for

relocation & fitment of the 15600WRB for model years 2012-14 (Step 13 for reference)

3. Start by removing front plastic skid shield from under the vehicle, using a flat tip screwdriver pry and

remove the plastic push pins holding the skid shield, seen in (Fig 1 & 1A)

4. Once removed start to remove the top plastic cover there are 2 push pins holding the plastic cover

in front of the grill, as seen in (Fig 2) with the plastic push pins removed, slide the cover to the left

side to allow for access of the inner nuts holding the bumper onto vehicle, as seen in (Fig 3 & 3A),

once done continue to remove driver side by sliding plastic to the right side (Fig 4 & 4A) shows

location of nuts to be removed.

Page 1 of 6

INSTALLATION INSTRUCTIONS

2007-14 WRANGLER WINCH RECIEVER PLATE BRACKET FOR AL15600

PART # 15600WRB

Photo of parts shown for reference

Winch receiver

late

1 2 3 4 5 6

Indice de contenidos

Pagina 1 - INSTALLATION INSTRUCTIONS

PARTS LIST: Qty’s Description Qty’s Description 1 Winch receiver plate bracket 8 12mm Speed nuts PROCEDURE: 1. REM

Pagina 2

5. Once inner nuts are removed begin to unplug the road lights from the factory wire harness, and unclip the harness from the bumper cover, as seen i

Pagina 3

mounting to the factory bumper brackets, as seen in (Fig 8) Snug but do not tighten hardware, Plug in the road lights with the wire harness and secure

Pagina 4

Page 4 of 6 Fig 4A Unplug wire harness from lights and

Pagina 5

0 Page 5 of 6 Fig 9 Fig 8 Secure bumper per side wit

Pagina 6 - Fig 10 Fig 10A

Page 6 of 6 Fig 9A Fig 11 Remove factory bracket by cutting it off with a grinder & cut off wheel Fi

Comentarios a estos manuales

Sin comentarios

Aries-automotive 15600WRB Manual de usuario

Busca en linea o descarga Manual de usuario para Para El Coche Aries-automotive 15600WRB. Aries Automotive 15600WRB User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Para El Coche Aries-automotive 15600WRB