Aries-automotive 3502 Manual de usuario descargar pdf

INSTALLATION INSTRUCTIONS

2007-13 FORD EDGE

EXCLUDES SPORT MODEL

PART # 3502

PARTS LIST:

1 Sport Bar 8 12-1.75mm x 35mm Hex Bolts

1 Driver/Left Mounting Bracket 4 12mm Lock Washers

1 Passenger/Right Mounting Bracket 12 12mm x 32mm OD x 3mm Flat Washers

1 Driver/Left Support Bracket 4 12mm Nylon Lock Nuts

1 Passenger/Right Support Bracket 2 10-1.50mm x 30mm Hex Bolts

2 12mm Double Nut Plates 6 10mm x 30mm OD x 2.5mm Flat Washers

2 10-1.50mm x 30mm Bolt Plates 4 10mm Nylon Lock Nuts

(2) 10mm x 30mm Bolt Plates

Driver/Left Side

ort Bracket

Passenger/Right Side

ort Bracket

(2) 12mm Double Nut

Plates

Driver/Left Side

Frame

Mountin

Bracket

Passenger/Right Side

Frame Mou

ntin

Bracket

PROCEDURE:

1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS

CAREFULLY BEFORE STARTING INSTALLATION. CUTTING IS REQUIRED.

2. Start installation under the front of the vehicle. Remove the plastic splash guard attached to the bottom

of the front bumper cover.

3. Insert (1) Double Nut Plate into the opening in the front of the frame on the passenger side, (Figures 1

& 2). Line up the (2) holes in the Double Nut Plate with the factory holes in the frame, (Figure 3).

4. Select the passenger side Frame Mounting Bracket. Hold the Mounting Bracket in position and secure

it by threading (2) 12-1.75mm x 35mm Hex Bolts, (2) 12mm Lock Washers, and (2) 12mm Flat

Washers through the holes in the Bracket, frame and into the Double Nut Plate, (Figure 4). Do not

tighten hardware at this time. Repeat Steps 3 & 4 for driver side Frame Mounting Bracket installation.

5. Select the passenger side Support Bracket and attach it to rear hole on the Mounting Bracket using the

included (1) 10-1.50mm x 30mm Hex Bolt, (2) 10mm Flat Washers and (1) 10mm Nylon Lock Nut,

(Figures 4 & 6). Do not tighten at this time.

6. Insert (1) Bolt Plate into factory hole in the frame, (Figure 5). Line up the remaining hole in the Support

Bracket with the previously installed Bolt Plate. Attach the Support Bracket to the Bolt Plate with the

included (1) 10mm Flat Washer and (1) 10mm Nylon Lock Nut, (Figure 6). Do not tighten hardware at

this time.

1 2 3 4

Indice de contenidos

Pagina 1 - INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS 2007-13 FORD EDGE EXCLUDES SPORT MODEL PART # 3502 PARTS LIST: 1 Sport Bar 8 12-1.75mm x 35mm Hex Bol

Pagina 2 - Fig 1 Fig 2

7. Repeat Steps 5 & 6 for driver side Support Bracket installation. Tighten all Mounting Bracket and Support Bracket hardware at this time. a.

Pagina 3 - Page 2 of 4

Passenger Side installation Pictured Page 2 of 4 (2) 12mm x 35mm Hex Bolts (2) 12mm Lock Washers

Pagina 4

Passenger Side installation Pictured Page 3 of 4 Fig 7 Fig 8A Fig 8B Complete Installation Front Front Front Cut as litt

Comentarios a estos manuales

Sin comentarios

Aries-automotive 3502 Manual de usuario

Busca en linea o descarga Manual de usuario para Para El Coche Aries-automotive 3502. Aries Automotive 3502 User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Para El Coche Aries-automotive 3502