Aries-automotive 4049 Manual de usuario descargar pdf

2002-05 Cadillac Escalade Front Bar Part # 4049

Installation Instructions

Parts List

1 – Font bar 1 – Mounting frame bracket (passenger side)

1 – Mounting Frame bracket (driver side) 10 – 7/16 x 1 ¼ Hex bolts

10 7/16 hex nuts 20 – 7/16 washers

Installing the mounting frame brackets

1. Remove factory tow hooks from front section of vehicle

2. Align driver side mounting bracket to the bottom and outer edge existing holes.

Position bracket in manner shown below.

3. Attach mounting frame brackets using the 7/16 x 1 ½ hex bolts, 7/16 hex nuts and

7/16 washers. (hand tighten as you may have to move the brackets around

slightly, to align the front bar)

NOTE: 2WD models, you may have to cut a space in the plastic spoiler for the

bottom of the front bar up rights to slide through and eventually attach to the

frame mounting brackets.

Installing the front bar

1. Line up the three holes on the lower portion of the front bar with the three holes

on the mounting frame brackets (inner edge) using the 7/16 x 1 ½ hex nuts and

7/16 washers to fasten the front bar to the mounting frame brackets. Once the

front bar is attached to the mounting brackets, align the left and right side of the

front bar to the bumper.

2. Once satisfied that the left and right side are equal distance from the bumper

tighten all fasteners.

NOTE: It is advisable to re-check all fasteners for tightness after one week.

Driver Side Shown

Attach front bar to inner

edge of mounting

brackets unsing 7/16 x 1

¼ hex bolts

Mount to frame in this direction

Attach to existing

holes using the 7/16 x

1 1/4 “ hex bolts

Pagina 1

2002-05 Cadillac Escalade Front Bar Part # 4049 Installation Instructions Parts List 1 – Font bar 1 – Mounting frame bracket (passenger sid

Sin comentarios

Aries-automotive 4049 Manual de usuario