Aries-automotive 15501-2 Manual de usuario descargar pdf

INSTALLATION INSTRUCTIONS

REAR BUMPER WITH DOUBLE TUBE

PART#15501/15501-2

07 JEEP WRANGLER 4 DOOR

PARTS LIST

1 Bumper

2 Brackets

2 Bolt plates

10 12MM X 35MM bolts

12 12MM washers

6 12MM lock nuts

4 12MM lock washers

PROCEDURE:

1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ

INSTRUCTIONS CAREFULLY.

2. Locate, remove and set aside the brackets (Fig 1)

3. Remove factory bumper by removing the side brackets (Fig 2) and the bolts in the removable

brackets (Fig 3)

4. Insert the driver side bracket into the frame (Fig 3)

5. Start the two 12MM bolts and thick washers through the bolt plate and into the frame.

6. Repeat the bracket installation on the passenger side of the vehicle.

7. Insert a thin piece of wood between the bumper and the trailer hitch receiver to prevent

damage. (Fig 4)

8. Position the bumper in between the two mounts and start the six 12MM bolts, washers and

locking nuts. (Fig 5)

9. Level the bumper and tighten all the fasteners. (Fig 6)

Fig 1

Driver side bracket

Passenger side bracket Factory bumper bracket

Fig 2

1 2

INSTALLATION INSTRUCTIONS REAR BUMPER WITH DOUBLE TUBE PART#15501/15501-2 07 JEEP WRANGLER 4 DOOR PARTS LIST 1 Bumper 2 Brackets 2 Bolt plates 10

Fig 3 Removable bracket (leave on) Bumper bracket Fig 4 Fig 5 Fig 6

Modelos relacionados 15501

Sin comentarios